Takex-PB200F Photoelectric Beam Sensor

• Synchronised Twin Beams for high reliability
• Double Modulated beam for unsurpassed immunity to direct and reflected sunlight, vehicle headlights and other light sources.
• Built-in view finder and monitor jack output for easy beam alignment
• 180 degree rotating optics for increased installation flexibility
• Automatic Gain Control circuit

• Detection system: Simultaneous breaking of 4 beams
• Infrared beam: LED pulsed beam, Double modulation
• Protection distance: Outdoor 200m (660ft) or less, Indoor 400m (1320ft) or less
• Beam arrival distance (max.): Outdoor 2000m (6600ft) or less, Indoor 2000m (6600ft) or less
• Response time: 50msec. to 700msec. (Variable at pot)
• Supply voltage: 12V to 30VDC (Non-polarity)
• Current consumption: 75mA or less
• Alarm output: Dry contact relay output form C, Contact action : Interruption time + delay time, Contact capacity : 30V AC/DC, 0.5A or less
• Tamper output: Dry contact relay 1b N/C, Action : Activated when cover is detached, Contact capacity : 30V AC/DC, 0.5A or less
• Alarm LED: Red LED (Receiver), ON : when an alarm is initiated
• Attenuation LED: Red LED (Receiver), ON : when beam is attenuated
• Functions: Monitor jack output, Sound check : Audible check of beam level, Frost proof cover
• Ambient temperature range: -25C to +60C (-13F to +140F)
• Mounting positions: Indoor / Outdoor
• Wiring: Terminals
• Weight: Transmitter : 1.3kg (45.5oz), Receiver : 1.3kg (45.5oz)
• Appearance: PC resin (wine red)