Takex FS-5000E Flame Sensor

The flame sensor FS-5000E immediately detects ultraviolet rays contained in flames and activates an external output. The weatherproof construction of the housing allows for use outdoors. It can be widely used for fire prevention in areas where fire is prohibited.

UPC: 100000900499
Also known as: PU-FS5000E, FS5000E

Technical Specifications: Supplied accessories: Tapping screw ∅6 x 30: 4pcs, Tapping screw ∅4 x 8: 1pc, Band: 1pc, Area mask seal: 1pc Appearance: Sensor part: PC resin (white), Bracket: AES resin (white) Weight: Approx. 550g (19.3oz) Installation: Indoor/outdoor Ambient temperature: -20°C to +50°C (-4°F to +122°F) Wiring: Reed wiring, Power supply: 2 / dry contact: 3 LED: Operation LED (red): synchronous dry contact relay, Memory LED (yellow): blinks for 3min and then lights Alarm memory: Memory LED blinks for 3min., then lights for 47min. (auto-reset) Operation mode (day/night function) - 5 lux night time operation, ∞ lux day time operation (adjustment volume) Alarm output: Dry contact relay Form C (NO/NC), Contact capacity: 30V (AC/DC) 0.5A, (resistance load), Operation time: the following are selectable - Detection time + off delay operation approx. 2sec to 1min, Detection time + off delay operation approx. 5sec to 10min; Output operation: the following are selectable - Same time as above continuous output, Same time as above flashing output; Power consumption: 35mA or less Power supply: 10V to 30VDC Sensitivity adjustment: Sensitivity: H (100%), L (50%) (selectable), Detection timer: 1sec, 6sec, 15sec, 30sec (selectable) Detection area: Distance: 10m (33ft) max. (7cm flame); Angle - Horizontal: approx. 100 degrees (60 degrees downward), Vertical: approx. 75 degrees (15 degrees upward); Adjustment range - Horizontal 25 degrees by base unit, Vertical 30 degrees (4 steps) by sensor head Detection system: Ultraviolet rays detection (detected wave length 180~260nm)

For more information about the Takex FS-5000E, please contact us.