Knowledge Base:  

What is the "E-Digital" button on my E985-R keypad used for?


Last Updated: 12/13/2013
By

The "E-Digital" button is used to program the E985-R Lever Lock.


In fact, pressing this button on any Lockey E-Digital Series Lock will initiate programming mode. In this mode, users can clear errors, program functions, and add/change/delete user codes. The "E-Digital" button also operates as a lock button.

The default user code for the E985-R (and other E-Digital locks) is "1234". Lockey recommends that be changed before the lock is even installed.

To program a User Code...
Enter the programming code, "E-Digital", (1), "E-Digital". Now you can enter your new user code. It can be any sequence of numbers, 4-10 digits in length. Press "E-Digital" when you're finished.

To erase the default "1234" user code...
Enter the programming code, "E-Digital", (2), "E-Digital", enter the user code you wish to erase, then "E-Digital".


Similar Products:
E-PRO-R Lever Lock
E-930R Electronic Knob Lock
E-910 Electronic Deadbolt



Was this article helpful?

Comments:
 

Related Articles
 >

Where should I store the override key for my E985-R Electronic Lever Lock?


 >

How do I install the E985-R mounting plate?


 >

How do I install the receiver module for the E985-R Electronic Lever Lock?


 >

How do I change the lever handling on my E985-R Lever Lock?


 >

How do I set the autolock time delay function on the E985-R Lever Lock?


 >

How do I program a disposable user code into the E985-R Lever Lock?


 >

If you delete all user codes from the E985-R, will the door still lock?


 >

How do you disable all user codes on the E985-R Lever Lock?


 >

What is the programming code for my Lockey E985-R Lever Lock?


 >

What do the different light indicators mean on my E985-R Lever Lock?


 >

Is there a way to restore the E985-R Lever Lock back to its factory settings?


 >

Can you mute sounds on the E985-R Lever Lock?


 >

Does the E985-R glow in the dark?