Von Duprin QEL9927EO 4 26D Surface Vertical Rod Device Exit Only, Satin Chrome
Also known as: QEL9927EO426D
Von Duprin QEL9927EO 4 26D Grade 1 Surface Vertical Rod Exit Bar, Wide Stile Pushpad, 48" Panic Device, 84" Door Height, Exit Only, Less trim, Motorized Latch Retraction, Less Dogging, Satin Chrome Finish, Field Reversible
UL certified for fire exit hardware, the 9827-F/9927-F Fire Exit Surface Mounted Vertical Rod Device pairs of doors up to 8' x 10' (2438mm x 3048mm). Information about the UL-approved fire escape hardware label and door opening size may be found in full on page 76. Devices are Grade 1 ANSI A156.3, 2008 compliant. The case of the 9827-F device is smooth, while the case of the 9927-F device is grooved. Except when the signal switch and tornado/hurricane device options are engaged, the surface vertical rod device is non-handed. The possible outside trim and device functions are shown on the next page. To prevent the bottom rod of the exit mechanism from being harmed by impacts from carts or gurneys passing through doors, vertical rod and latch protectors are supplied. On composite fire doors made of hollow metal or tin cladding, rod and latch guards may be utilized.
vertical rod gadget installed on the surface.
Surface vertical rod exits from the 9927 series are designed for high-traffic areas. |
Features:
- Device ships: EO/DT/NL functionalities. Selectable field Remove the NL drive screw from the device for TP, K, or L.
- Device lengths: 2' 2" (610 mm) door size, 3' 2'4' to 3' (711 mm to 914 mm) door size, 4' 2'10" to 4' (864 mm to 1219 mm) door size, and 4' to 4' (864 mm to 1219 mm) door size.
- Centerline of the device from the finished floor: 395 /8 " (1006 mm)
- Dimensions of the center case: 8" x 2 3/4" x 2 3/8" " (203mm x 70mm x 60mm)
- Dimensions of the mechanism case: 2 1/4" x 2 1/4" (57mm x 57mm)
- Pushbar projection: 3 13/16" (97 mm) in neutral position; 3 1/16" in depressed position (78 mm)
- Deadlocking anti-friction top and bottom bolts for the latch "Throw (16mm)
- 1/4-inch door undercut "(7mm) is advised.
- Upper and lower latch case: 4 1/2 "x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm)
- 1 /2 vertical rods "7' (2134mm) doors fit on square tube with regular rods. Bottom rod length: 31 1/2" (794mm); Top rod length: 34 15/16" (887mm). For doors taller than 7', extension rods are available in lengths of 1' (205mm) or 3' (914mm). For doors that are 8' (2438mm) and 10' (3048mm) tall, a one-piece top rod is offered.
- Fasteners & Sex Bolts: (SNB) Contains 325 SNB for top and bottom latch and screw pack for doors that are 1 3/4" (44mm) to 2 1/4" (57mm) thick in metal or wood. Available is a 425 SNB option.
|
