Visonic MCX-600 PowerCode Wireless Repeater

MCX-600 wireless repeater extends the communication range of PowerCode systems, by relaying data between any PowerCode receiver and remote wireless transmitters. Up to 16 auxiliary repeaters can be positioned between the farthest group of receivers transmitters and the receiver.

For maximum security, the MCX-600 repeater uses a unique, factory programmed, randomly selected 24-bit digital alarm ID code during each transmission. This code is selected from 16 million possible code combinations and is therefore unique and virtually impossible to accidentally reproduce.

Other important benefits of the MCX-600 include the unique anti-collision transmission sequence, which ensures accurate reception of simultaneous signals from multiple transmitters. The fully supervised repeater issues a test report on an hourly basis, indicating faults such as power failure, low battery charge and tampering.

Powered by 13-20 VDC or 11-16 VDC power supply, the MCX-600 uses a 9-Volt nickel cadmium rechargeable battery as a backup in case of power failure.

UPC: 780245404428
Also known as: VS-MCX600, MCX600



For more information about the Visonic MCX-600, please contact us.