Viking LSD2 Line Sharing Device

Why pay for a dedicated line for your elevator/emergency phone or alarm panel?

The LSD2 Line Sharing Device allows the user to share an existing phone line with an emergency phone or other priority alarm device. This can save hundreds of dollars a year over leasing a dedicated phone line. The LSD2 can be used on any C.O. line or analog PABX/KSU station.

An outbound call on the DEVICE 2 (PRIORITY) port takes priority over a call in progress on the DEVICE 1 port. Any call in progress on the DEVICE 1 port will be disconnected for 2 seconds, returning dial tone to the DEVICE 2 (PRIORITY) port. A busy signal is then sent to the DEVICE 1 port.

For incoming calls, the LSD2 can route calls to the DEVICE 2 (PRIORITY) port using Caller ID, Distinctive Ring, or Quick Call Back. All other calls will be routed to the DEVICE 1. Alternatively, the LSD- 2 can be set up so that all inbound calls are routed to the DEVICE 2 (PRIORITY) port.

Note: Caller ID is not passed through the LSD2 to the devices.

UPC: 615687222050
Also known as: VK-LSD2

Technical Specifications: Connections: 6 screw terminals Talk Battery: 35V DC Environmental: 0 C to 32 C (32 F to 90 F) with 5% to 95% non-condensing humidity Shipping Weight: .9 kg (2 lbs) Dimensions: 133mm x 89mm x 44mm (5.25 x 3.5 x 1.75) Power: 120VAC / 12VDC 500mA UL listed adapter provided

For more information about the Viking Electronics LSD2, please contact us.