|
|
|
|
Takex PVW-12TE Sensor Speaker Also known as: PVW12TE, PU-PVW12TE The PVW-12TE is a sensor speaker which detects passive infrared emitted from human beings and triggers 2 different messages depending on Day/Night or control input settings. |
Features:
- Dual-Zone sensor head can resist detection of small animals
- Dual Control; 2 Recordable Messages (Daylight or ARM/DISARM Settings)
- Record Messages using built-in Microphone or Audio Line input
- Replay Time Adjustable
- Day/Night Sensing
- Adjustable Pulse Count & Sensitivity
- 0.8-1.2m Mounting Height
|
Technical Specifications:
- Detection system: Passive infrared
- Coverage: Max. detection distance 12m (40ft), Horizontal detection: 7 zones, Detection angle: 90 degrees, Downward detection: 7 zones
- Adjustment: Horizontal: 90 degrees (3 degrees fine adjustment), Detection distance 3-12m (10-40ft) by adjusting vertical angle of downward curtain
- Supply voltage: 10 to 30VDC (non-polarity)
- Current consumption: 55mA max. at standby, 300mA max. on activation (when max. volume)
- ARM/DISARM input: NO/NC selectable with a switch, N/O: armed when closed, N/C: armed when open, Response time: 300msec or longer, Input resistance: 1k or less
- Relay input: NO/NC selectable with a switch, N/O: armed when closed, N/C: armed when open, Response time: 300msec or longer, Input resistance: 1k or less
- Day light control: Recognised as night when illuminance of the surrounding area is lower than the set illuminance.
- Contact output: Dry contact relay output NO/NC (selectable), Contact operation: one-shot operation approx. 2sec., Contact capacity: 30V AC/DC, 0.5A or less
- Sound output: Replay the two different messages through the built-in speaker, Operation: off delay operation, Repeat sounds during detection time + approx. 2sec to 5min., Output sounds: [Message 1] and [Message 2] (max. 8sec each), Sound volume adjustment: 80dB max., Recording method: Built-in microphone or Line input
- Operation LED: Red LED, Blinks at warm-up (LED can be disabled), Lights on detection (LED can be disabled), Fast blinks for recording stand-by, Lights during recording (max. 8 seconds)
- Tamper output: Dry contact relay output: N/C, Capacity: 30V (AC/DC), 0.5A max.
- Pulse count: Once/Three times (selectable)
- Sensitivity adjustment: 30% to 100% (by potentiometer)
- Connection: Terminals
- Ambient temperature: -20C to +50C (-4F to +122F)
- Weight: 480g (16.8oz)
- Appearance; Body: AES resin / Lens: PE resin
|
UPC: 100000901892
Average rating: 5.0, based on
2 reviews
For more information about the Takex PVW-12TE, please contact us.
|
|
|
|
|
|
|