|
The AQU126 power supply series offers units with an internal transformer and single voltage power supply in a small and solid 14" by 9" by 3.5" enclosure that weighs only 7.65 lbs.
These power supplies are highly efficient and will ensure your access control equipment experience peak performance. It will support up to two sealed gel, AGM or wet lead batteries, and includes a plug-in battery cable assembly. An optional 36" plug-in battery cable assembly is also available if you would like to mount the battery in a remote location.
You'll be able to customize the access control inputs and outputs to accommodate your customer's needs. You can choose inputs and outputs with fire trigger in either PTC or with fuse/dry contact. You can also choose fire relay only, or configure your outputs with a fire relay input.
The AQU126 series has several safety measures designed to protect the unit and keep the power flowing as much as possible. There are LED indicators and form "C" outputs that will let you keep track of AC failure, or a low battery. In the event of a low battery, there is an automatic disconnect that extends the life of the battery. When the power supply is under a full load, it enables quicker battery recharging to avoid low battery scenarios. Even if there is an AC brown out, the power supply will still work with a minimum of 60 VAC. The circuit breakers will reset in the event of overcurrent, thermal runaway, or reverse battery hookup. The fuse is also protected against a power surge for AC input and DC output. If there is ever a problem with the unit, Securitron offers a MagnaCare lifetime replacement policy with no fault warranty.
The AQU126 series can use any power source from 90 to 240 VAC and 47 to 63 Hz, and provides a 6 Amp/12 VDC continuous output, with a 78 VA maximum output. The voltage is typically around 13.65, but ranges from 9.8 to 13.67 VDC. It operates at 27 KHz at a temperature ranging from -4 to 104 degrees Fahrenheit, or -20 to 40 degrees Celsius.
There are six models in this series. The AQU126 has one output, and has listings in UL 294, UL 603, ULCS318-96, UL 1481 and CSA C22.2 No. 205. The AQU126-8F, AQU126-8C, AQU126-8C1R, AQU126-8C8R, and AQU126-8F8R models all have eight outputs that are Class 2 Power Limited. The 8F and 8F8R are both UL 294 listed, and have 2 Amp rated fuses. The latter also has eight access control fire relays. The 8C has a 1.5 Amp PTC fuse, and is UL 294, UL 603, ULCS318-96, UL 1481 and CSA C22.2 No. 205 listed. The 8C1R has a 1.23 Amp PTC fuse, one fire relay, is UL 294 listed, and UL 603 and ULCS318-96 recognized. The 8C8R has a 1.04 Amp PTC fuse, and eight access control fire relays.
A short but helpful video on Securitron’s line of switching power supplies is available below:
|
