Home
Access Control
Seco-Larm SD-9163-KSVQ No Touch Request-to-Exit Plate, Adjustable Delay Timer, Outdoor, Slimline, English, Mechanical Override Button

Seco-Larm SD-9163-KSVQ No Touch Request-to-Exit Plate, Adjustable Delay Timer, Outdoor, Slimline, English, Mechanical Override Button

MPN: SD-9163-KSVQ
JMAC ID: 200100359

$58.76

JMAC_ID:: 200100359
df_manual_boost:: 2.20

Please Note: In order to keep our prices low, we have a minimum order requirement of $99

Product Resources

SD-9163-KSVQ Data Sheet

We're here to help

Request a Quote

Low Price Guarantee

The ENFORCER Outdoor No Touch Request-To-Exit Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since it is No Touch, this sensor is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

UPC: 676544011828
Also known as: SL-SD9163KSV, SD9163KSVQ

Technical Specifications:

Dimensions: 4-1/2" x 1-1/2" x 1-1/2" (115x39x39mm)
Range: 2"~7" (5~18cm)
Weight: 77g
Operating Temperature: -4°~131° F (-20°~55° C)
IP rating: IP65
Output Time: 0.5~20 s, toggle
LEDs: Standby - Red, Triggered - Green
Response Time: 10mS
Relay Type: Form C dry contact, 1A@30VDC
Current Draw: Standby - 16mA@12VDC / 25mA@24VDC, Triggered - 20mA@12VDC / 32mA@24VDC
Operating Voltage: 12~24 VDC

For more information about the Seco-Larm SD-9163-KSVQ, please contact us.

1A relay, adjustable trigger duration 0.5~20 seconds.
Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated.
Weather-resistant (IP65) for outdoor use.
Manual override button functions without electricity in case of power failure.
Adjustable sensor range up to 7" (18cm).
Clean and simple no-touch operation reduces the risk of cross-contamination.
Stainless-steel plate, available in slimline or single-gang.