Home > System Sensor > Conventional Detection > i3 Series >

System Sensor 4WTAR-B Photoelectric i3 Smoke Detector, 4-Wire, Thermal Sensor, Built-In Sounder, Form C Relay
4WTAR-B System Sensor | JMAC Supply
 
In Stock
Our Price: $78.99


Product Code: SYSTEM-SENSOR-4WTAR-B
Qty:

Description Product Resources
 

System Sensor 4WTAR-B Photoelectric i3 Smoke Detector, 4-Wire, Thermal Sensor, Built-In Sounder, Form C Relay


  • Also known as: 4WTARB, BK-4WTARB

  • The 4WTAR-B is a 4-wire, photoelectric i3 smoke detector with thermal sensor, built-in sounder, and Form C relay. Throughout the i3 series, installation is simple with its installer-friendly base and plug-in design. The base accommodates a broad range of back box and direct mounting options and provides ample space for pre-wiring the device. To complete the installation, the i3 detector plugs into its base with a simple Stop-Drop N Lock action.

    To reduce the likelihood of nuisance alarms, all i3 detectors are equipped with both drift compensation and smoothing algorithms. These capabilities minimize both short- and long-term causes of nuisance alarms, such as RF interference and dust accumulation. When connected to the 2W-MOD2 loop test/ maintenance module or an i3 Ready panel, 2wire i3 detectors can generate a remote maintenance signal when in a maintenance or freeze trouble condition. To measure the sensitivity of any i3 detector, the SENS-RDR displays the reading, in terms of percent-per-foot obscuration, within seconds.

    i3 has red and green LEDs to simplify local status indication during power-up, standby, alarm, maintenance, and freeze trouble conditions. When in alarm, i3 sounder models generate an 85 dB temporal tone. If connected to the RRS-MOD reversing relay/synchronization module, all i3 sounders on the loop will activate when one detector is in alarm. The RRS-MOD also synchronizes i3 sounder output to ensure a clear audible signal.

    Should the application call for differentiating between a local and a general alarm, the i3 line offers an isolated thermal model, which initiates a local alarm when smoke is detected, and a general alarm when the thermal sensor is activated.
    Features:
    • 85 dB sounder
    • Form C relay
    • Isolated thermal sensor
    • Plug-in design (base included)
    • In-line terminals
    • Flexible mounting options
    • Stop-Drop N Lock attachment to the base
    • Removable cover and chamber
    • Remote maintenance signaling
    • Drift compensation and smoothing algorithms
    • Simplified sensitivity measurement
    • Dual-color LEDs


    Technical Specifications:

    • Alarm Contact Ratings: 0.5A @ 30 VAC/DC
    • Alarm Current: 50mA max.
    • Auxiliary Contact: Form C
    • Auxiliary Contact Ratings: 2A @ 30V AC/DC
    • Detection: Photoelectric
    • Dimensions: 2.0" (51mm) H x 5.3" (127mm) Dia.
    • Freeze Trouble: 41F (5C)
    • Heat Sensor: 135F (57.2C) fixed
    • Humidity Range: 0% to 95% RH, noncondensing
    • Maximum Ripple Voltage: 30% of applied voltage (peak to peak)
    • Operating Voltage: 12/24 V non-polarized nominal, 10 min. to 35 max.
    • Sensitivity: 2.5%/ft. nominal
    • Standby Current: 50 A max. avg.
    • Temperature Range: 32 to 100F (0 to 37.8C)
    • Weight: 7.1 oz. (200 g)
    • Wiring: 4-wire
    • Wiring Gauge: 14-22 AWG


    UPC: 783863020001

    Average rating: 5.0, based on 1 review


    For more information about the System Sensor 4WTAR-B, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    System Sensor > Conventional Detection > i3 Series
    System Sensor
    System Sensor > Conventional Detection
    Fire & Life Safety > Smoke Detectors > 4-Wire Smoke Detectors
    System Sensor > Spot Detection > Conventional Smoke Detectors
    Fire & Life Safety > Smoke Detectors
    System Sensor > Spot Detection
    Fire & Life Safety