Gentex GCS24-CR Red Ceiling Mounted Strobe Also known as: GCS24CR, GN-GCS24CR The Gentex GCS24-CR Commander 4 Series Selectable Candela Evacuation Signal 24VDC is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms with the lowest current consumption to help reduce operating costs. This smoke alarm comes with selectable candela levels of 15, 30, 75, 95, 115, and 150. It features a super slide bracket for easy supervised testing and a checkmate instant voltage verification system. Protected by a tamper-proof reentrant grill, this smoke alarm has the capability to synchronize the horn and strobe together with the control module, and has input terminals of 12 to 18 AWG. Users can also switch the dBA from low to high. |
Features:
- Nominal voltage 24VDC
- Tamperproof field selectable candela options of 15, 30, 75, 95,115 & 150
- Super-Slide Bracket - Ease of Supervision Testing
- Checkmate - Instant Voltage Verification
- Unit Dimensions: 6 (15.24 cm) x 2.6 (6.604 cm)
- Synchronize strobe and/or horn with Gentex AVSM Control Module
- Prewire entire system, install mounting bracket, then install signals
- Documented lower installation and operating costs
- Input Terminals 12 to 18 AWG
- Switch Selection for High or Low dBA
- Switch Selection for 2400Hz or Mechanical Tone
- Switch Selection for Continuous or Temporal 3
- Tamperproof re-entrant grill
- Surface mount with the GCSB (Gentex Ceiling Surface Mount Box)
- Silence audible while visual appliance will remain flashing (for use in accepted jurisdictions)
- Faceplate available in red or off-white
|