Viking DVA-2WA Promotion On Hold Announcer/Repeater

Name: Viking DVA-2WA Promotion On Hold Announcer/Repeater
Rating: 5.0 (2 reviews)

Also known as: DVA2WA, VK-DVA2WA

The DVA-2WA is a digital announcer/recorder with a built in 2 watt amplifier. Designed to provide music and promotion on hold, the DVA-2WA can playback in a continuous loop or alternate between promotions and an auxiliary music source at 2 second to 30 minute intervals. Any number of multiple messages may be recorded.

The announcer comes with four professionally pre-recorded promotion on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation.

The output of the DVA-2WA may also be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc.

The DVA-2WAs non-volatile memory eliminates the need for batteries or costly built in tape decks. This provides the convenience of recording at the shop or professional studio and then shipping to the installation site.

Features:

7.5 minutes of user recordable memory
Select from user recorded messages or four pre-recorded on-hold pacifier messages
Three playback options: on demand, continuous, and timed intervals
Non-volatile memory (no batteries required)
Built-in 2 watt amplifier to connect directly to speakers
Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
600 ohm audio output for high wattage amplifiers
Multiple message capabilities (total number of messages only limited to maximum record time)
AGC (Automatic Gain Control) for trouble free recording
Auxiliary audio (MOH) input for between message background music
Remote trigger input for on-demand playback from a remote contact closure
Press and hold play mode
Status LED for record and playback indication
Master and auxiliary input volume controls
I.O. communications port (allows only one DVA-2WA to announce at a time)
One year warranty
Made in the USA

Technical Specifications:

Power: 120V AC/12V DC, 500mA adapter provided
Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
Shipping Weight: 1.0 kg (2.2 lbs)
Environmental: 0C to 32C (32F to 90F) with 5% to 95% non-condensing humidity
Frequency Response: 100-3.4KHz
Sampling Rate: 64K (equivalent) User Message
Length: 7.5 minutes maximum
Recording Audio Input Level: 30mV - 1.0V RMS (AGC range)
600 Ohm Audio Output Level: 0.3V RMS maximum (across a 600 ohm load)
Speaker Output Power: 2 watt peak
Connections: (1) 6-position cage clamp terminal block, (3) 3mm (1/8") audio jacks, (1) handset jack
Pre-recorded Pacifier Message Length: 30 seconds total
Minimum Speaker Impedance: 2.66
Ohms: (3) 8-Ohm speaker

UPC: 615687222876

Average rating: 5.0, based on 2 reviews