Fire-Lite MMF-300 Monitor Module

Name: Fire-Lite MMF-300 Monitor Module
Rating: 5.0 (2 reviews)

Also known as: MMF300, FL-MMF300

The Fire-Lite MMF-300 is a standard-sized monitor module that monitors a zone of 4-wire smoke detetors, manual pull stations, water flow devices, and other open dry-contact alarm initiation devices.

The MMF-300 supervises either a Class A or Class B circuit of a dry-contact input device. The unit is equipped with LED indicators and high-noise immunity for enhanced performance.

The MMF-300 mounts easily to a 4" square box.

Features:

Built-in type identification automatically identifies this device as a monitor module to the control panel
Powered directly by two-wire SLC loop. No additional power required
High noise (EMF/RFI) immunity
SEMS screws with clamping plates for ease of wiring
Direct-dial entry of address: 01 159 on MS-9600 series panels, 01 99 on other compatible systems
LED flashes during normal operation and latches on steady to indicate alarm

Technical Specifications:

Nominal operating voltage: 15 to 32 VDC
Maximum current draw: 5.0 mA (LED on)
Maximum IDC wiring resistance: 40 ohms
EOL resistance: 47K ohms
Temperature range: 32F to 120F (0C to 49C)
Humidity range: 10% to 93% noncondensing
Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box

UPC: 783863012433

Average rating: 5.0, based on 2 reviews