 |
 |
 |
|
Keri Systems NXT-4D-MSC Door Reader Controller, 4-Door/8-Reader, 12 Volt DC, 650 Milliampere Input, 24 Volt DC, 1 Ampere Output, With Mercury Firmware
Also known as: NXT4DMSC, KF-NXT4DMSC, KSI-NXT4DMSC
The KERI-SYSTEMS-NXT-4D-MSC Four Door/Eight Reader Controller is built for today's IT environments. With all Ethernet functionality built directly into the controller, Keri's proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration.
By using an existing TCP/IP network, controller cabling costs can be eliminated, or by using inexpensive unshielded CAT5 cable if building a new network they can be reduced up to 50% over traditional hard-wired access systems.
The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any network's valuable bandwidth. The unit is equipped with a Mercury power system that brings enchanced capabilities to users of the NXT hardware platform. |
Features:
- 4 Door/8 Reader Controller for Keri's Doors NXT product line
- On-board TCP/IP - no network adapters required
- Reduces controller cabling cost up to 50% over RS-485, Current Loop or other traditional networking schemes by allowing unshielded CAT5 cable
- Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
- Embedded MAC Address for One button AutoConfiguration
- Built-In Tamper Input
- Standard 4 PIN Block and RJ Jack built-in for network connection
- Re-assignable Inputs and Outputs
- Flash Memory for easy firmware upgrades
- Up to 64 Controllers (256 doors) and 1024 auxiliary I/O points per controller network
- 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
- Locking Metal Enclosure (optional without)
- 96 Bit Encryption
|
Technical Specifications:
- Dimensions: Enclosure 13.125" H x 10.625" W x 3.06" D (33.34 cm x 26.99 cm x 7.77 cm)
- Dimensions: PC Board 5.6" H x 6.6" W x 2.55" D (14.28 cm x 16.83 cm x 2.55 cm)
- Weight (In Enclosure): 5.00 Lbs (2.27 Kgs)
- Input Voltage: + 12 VDC nom. (10 - 14 VDC)
- Current Draw: 650 mA typical
- Inputs: (8, reassignable) Door Contact Switch (4), Request to Exit (4), Expandable up to 24 Inputs
- Outputs (4, reassignable): 1.0 amp (24 VDC max.) dry circuit, Expandable up to 20 Outputs
- Reader Capacity: 8 with NXT Readers, 4 with Wiegand or MS Readers
- Buffer Capacity: 50000 Cardholders, 10000 Events
|
UPC: 819345010274
Average rating: 5.0, based on
1 review
For more information about the Keri Systems NXT-4D-MSC, please contact us.
|
|
|
 |
|
 |
|
