 |
 |
 |
|
System Sensor P2RL Horn Strobe, Wall Mount, FIRE, Red, Clear Lens
Also known as: BK-P2RL
The System Sensor P2RL is a red wall mount two-wire horn strobe. The unit features FIRE printed in white and a clear lens.
The System Sensor L-Series offers the most versatile and easy-to-use line of horns, strobes, and horn strobes in the industry with lower current draws and modern aesthetics. With white and red plastic housings, standard and compact devices, and plain, FIRE, and FUEGO-printed devices, System Sensor L-Series can meet virtually any application requirement.
The L-Series line of wall-mount horns, strobes, and horn strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.
To further simplify installation and protect devices from construction damage, the L-Series utilizes a universal mounting plate for all models with an onboard shorting spring, so installers can test wiring continuity before the device is installed.
Installers can also easily adapt devices to a suit a wide range of application requirements using field-selectable candela settings, automatic selection of 12- or 24-volt operation, and a rotary switch for horn tones with two volume selections. |
Features:
- Color: Red
- Lettering: FIRE
- Wall mount
- Clear lens
- Two-wire
- Updated Modern Aesthetics
- Small profile devices for Horns and Horn Strobes
- Plug-in design with minimal intrusion into the back box
- Tamper-resistant construction
- Automatic selection of 12- or 24-volt operation at 15 and 30 candela
- Field-selectable candela settings on wall units: 15, 30, 75, 95, 110, 135, and 185
- Horn rated at 88+ dBA at 16 volts
- Rotary switch for horn tone and two volume selections
- Mounting plate for all standard and all compact wall units
- Mounting plate shorting spring checks wiring continuity before device installation
- Electrically Compatible with legacy SpectrAlert and SpectAlert Advance devices
- Compatible with MDL3 sync module
- Listed for wall mounting only
|
Technical Specifications:
- Candela: Selectable strobe settings of 15, 30, 75, 95, 110, 135, and 185 cd
- Color: Red
- Location: Indoor
- Marking: FIRE
- Maximum Humidity: 10 to 93% non-condensing
- Mounting: Wall
- Operating Temperature: 32F to 120F (-0C to 49C)
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- Series: L-Series
- Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
- Wall Mount Dimensions: 5.6"L x 4.7"W x 1.25"D (142 mm L x 119 mm W x 64 mm D)
- Wiring Gauge: 12 to 18 AWG
|
UPC: 783863047732
Average rating: 5.0, based on
1 review
For more information about the System Sensor P2RL, please contact us.
|
|
|
 |
|
 |
|
