Potter Amseco PS15-2 Low/High Supervisory Pressure Switch for Low Differential Dry Valves

The Potter PS15 Series Supervisory Pressure Actuated Switches are designed primarily to detect an increase and/or decrease from normal system pressure in automatic fire sprinkler systems. Typical applications are: air/nitrogen supervision in Dry pipe and pre-action systems, pressure tanks, air supplies, and water supplies. The PS15 has two switches. The Low switch is factory set to activate at approximately 10 psi (0,35 BAR) on a decrease in pressure. The High switch is factory set to activate at approximately 20 psi (1,4 BAR) on an increase in pressure. See section heading Adjustments and Testing if other than factory set point is required.

UPC: 785192021759
Also known as: PS152, PL-1340415

Technical Specifications: Pressure Connection: Nylon 1/2" NPT male Conduit Entrance: Two knockouts provided for 1/2" conduit. Individual switch compartments and ground screw suitable for dissimilar voltages Dimensions: 3.78" (9.6cm)W x 3.20" (8.1cm)D x 4.22" (10.7cm)H Switch Contacts: SPDT (Form C), 10.1 Amps at 125/250VAC, 2.0 Amps at 30VDC, One SPDT in PS40-1, Two SPDT in PS40-2 Maximum System Pressure: 300 PSI (20.68 BAR) Differential: Typical 1 lb. at 5 PSI (.07 at 0.34 BAR) 3 lbs at 30 PSI (.21 at 2.1 BAR) Pressure Range: 5-30 PSI (0.35 - 2.07 BAR) Factory Adjustment: LOW switch operates at approximately 10 psi (0.7 BAR) on decreasing pressure. HIGH switch operates at approximately 20 psi (1.4 BAR) on increasing pressure. Enclosure: Cover- Die-cast with textured red powdercoat finish, single cover screw and rain lip; Base- Die-cast

For more information about the Potter / Amseco PS15-2, please contact us.