Potter Amseco OSYSU-1 Outside Screw and Yoke Valve Supervisory Switch, Single Switch

The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve. The OSYSU-1 contains one set of SPDT (Form C) contacts. These switches mount conveniently to most OS&Y valves ranging in size from 2 to 12 (50mm to 300mm). They will mount on some valves as small as (12,5mm). The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with each device.

UPC: 785192000501
Also known as: PL-OSYSU1, OSYSU1

Technical Specifications: Conduit Entrances: Two Knockouts for 1/2” conduit provided Environmental Limitations: -40º F to 140ºF (-40ºC to 60ºC), NEMA 4X (IP 65) and NEMA 6P (IP 67) Enclosure (Use suitably rated conduit and connector) Indoor or Outdoor Use Contact Ratings: One Set of SPDT (Form C) 10.0 Amps at 125/250 VAC, 2.0 Amps at 30VDC Resistive, 10 mAmps minimum at 24 VDC Cover: Tamper Tamper Resistant Screws, Optional Cover Tamper Switch Available Enclosure: Cover: Die Cast Finish: Red Powder Coat; Base: Die Cast Finish: Black Powder Coat. All parts have corrosion resistant finishes Weight 1.6 lbs (0.73 kg)

For more information about the Potter / Amseco OSYSU-1, please contact us.