Honeywell Ademco VISTA-20PSIA Control Panel w/ CP-01 SIA Certification Also known as: VISTA20PSIA, VISTA-20PSIA The The high capacity, feature-rich Honeywell VISTA-20PSIA control panel for CP-01 SIA certifications lets you deliver more value to your customers on each and every sale with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20PSIA, used with an AlarmNet Internet or 4G communicator can be installed in premises without TELCO lines. The panels installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20PSIA an ideal choice for higher end installations. |
Features:
- IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G
- Supports four graphic touchscreen keypads
- Wireless keys can be programmed without using zones
- Eight on-board hardwired zones standard (15 when Zone Doubling feature is used): 40 hardwire expansion zones and 40 wireless expansion zones
- Two low current on-board trigger outputs
- 100 Event Log viewable at system keypads with time/date stamp
- 48 system user codes assignable to either partition
- Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
- Two independent partitions plus a common partition: Global Arming from any system keypad, Go to function to view or operate one partition from the other and Separate partition account numbers
- 16 output devices: Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
- Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
- Supports four-wire and up to 16 two-wire smokes
- Works with Sentrol CleanMe maintenance signal
- Multiple actions on output devices depending on system state
- Turns lights off when system arms
- Turns the same light on when system disarms
- Flashes same lights when system is in alarm
- Built-in phone line cut monitor with programmable delay and annunciation options
- Display on system keypads
- Trigger local sounders
- Trigger system bell
- During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
- Dynamic Signaling: Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio
- Viewable on system keypads: Exit countdown, Time and date display, Event log
- Auto keypad backlighting on entry
- Keyswitch arming
- Programmable macro buttons and single-button arming
- Supports a variety of wireless remote controls for single-button operation
- User Scheduling: Latchkey reports to pagers, Auto arm/disarm and User access time windows
- VIP Module allows system control from any touchtone phone
- Chime by zone
|