Honeywell Intellisense IS-216T-CUR 10M Curtain PIR

• Meets EN 50131-1 and TS50131-2-2
• Security Grade 2, Class II Environmental
• Advanced Dual slope temperature compensation provides improved protection in warm environment
• Digital processing for improved catch and false alarm protection
• Shock algorithm to reduce false alarms
• Solid State alarm relay cannot be compromised by a magnet
• Dip switches for easy setting of parameters
• 10 min. walk test after start-up or trigger
• Improved RF immunity offering additional protection against false activations
• Large wiring channel on back to allow surface wiring
• Patented look-down mirror provides optimum detection directly beneath the sensor
• Wall-mount and corner mount knockouts provides mounting flexibility
• Sabotage-resistant lens design
• Selectable sensitivity
• Tamper switch is activated before access is possible
• White Light Immunity of minimum 6500 Lux reduces false activiation
• Bug guard prevents insects access to the sensor optics preventing false
• activation
• Designed for residential and lightcommercial applications
• Silent relay allows for use in quiet environments

• Detection method: Dual element passive infrared
• Range: 10 m. in vertical wall mount orientation
• Detection zones: 18 and 4 look-down
• PIR sensitivity: Low (Pulscount 2) and High (Pulscount 1)
• LED Enable: By dipswitch
• Mounting Height: 1.5 to 2.7
• Power requirements: 8.5~15.4 Vdc, 16 mA @ 12 Vdc
• Alarm Relay: Form A (NC) / 30 mA@24 Vdc, max. 40 Ohm protective resistor
• Tamper Switch: 30 mA @ 24 Vdc
• Operating Temperature: -10C to +55C
• Temp. compensation: Advanced dual slope
• Relative humidity: 5% 95% non condensing
• RF Immunity: 30 V/m from 10 to 1000 MHz.
• WLI: Better than 6500 Lux
• Dimensions: 86 x 60 x 38 mm (HxWxD)
• Weight: 67 gram