Fire-Lite ISO-6 Six Isolator Module

The ISO-6(A) Six Fault Isolator Module provides six equivalent circuits that will allow a portion of the communications loop to continue operating when a short circuit occurs on that loop. An amber LED indicator will blink in the normal state for each of the six inputs and will latch on during a short circuit condition. The module will automatically restore the communications loop to normal condition when the short circuit is removed.

The ISO-6 Six Isolator Module is an automatic switch that opens when the line voltage drops below four volts. Isolator modules should be spaced between groups of sensors or modules in a loop to protect the rest of the loop. If a short occurs between any two isolators, then both isolators immediately switch to an open circuit state and isolate the devices between them. The remaining units on the loop continue to fully operate.

UPC: 783863045356
Also known as: FL-ISO6, ISO6

Technical Specifications: Dimensions: 6.8"H x 5.8"W x 1.0"D. Wire Gauge: 12 AWG (3.31 mm²) to 18 AWG (0.821 mm²). Mounting Options: CHS-6 Chassis, BB-2F Cabinet, BB-6F Cabinet. Shipping weight: 1.1 lb. (0.50 kg) including packaging. Humidity: 10% to 85% non-condensing. Temperature Range: 32° F to 120° F (0° C to 49° C). Maximum Current Draw: 17 mA per circuit in isolation, 102 mA with all circuits in isolation. Stand-By Current: 450 µA per circuit, 2.7 mA all circuits. Normal Operating Voltage: 15-32 VDC.

For more information about the Fire-Lite ISO-6, please contact us.